Dongfeng Small Dollyka road car chassis configuration: wheelbase 3300, CY4102-CE4F power of 73 watts, 188mm section frame, 1.8 tons of front axle, 3.5 tons of rear axle, 7.00R16 steel wire tire, single row 1730 driving Room, 24 batteries, without air conditioning, power steering, air brake, no air brake, clutch boost, 5-speed gearbox, springs 6 6+5. Wet type: Wet dust removal, suction and brush combination, Jiangling 77 horsepower auxiliary engine, centrifugal fan, four diameter 800MM vertical cyclone sweep (sweeping with water spray device), garbage compartment and water tank are made of stainless steel. Xiaobawang garbage compartment 2.5 square, water tank 1 side, full floating lifting nozzle, the maximum cleaning width is 3 meters, the cleaning speed is 3-15 km / hour, the cleaning efficiency is more than 95%, and the maximum inhalation particle is 110MM. ã€The main technical parameters】 Product trademark Chusheng Announcement Lot 275 Product Name CSC5070TSL4 Sweeper Product No.ZKGCU4WP03F Total mass (Kg) 7300 Tank volume (m3) Rated load mass (Kg) 1435,1500 Dimensions (mm) 5990×2000×2400 Curing quality (Kg) 5670 Cargo size (mm) × × Rated passenger (person) Quasi-trailer total mass (Kg) Number of passengers in the cab (person) 3,2 Load mass utilization factor Approach angle / departure angle (°) 19/15 Front overhang / rear overhang (mm) 1032/1658 Number of axes 2 Wheelbase (mm) 3300 Axle load (Kg) 2920/4380 Maximum speed (Km/h) 95 Other side protections are replaced by dedicated work units on both sides of the vehicle. The rear protection is integrated with the vehicle structure. The rear protection is 550mm above the ground. When the number of passengers in the cab is 2, the load mass is 1500kg. With the optional chassis cab. (This article comes from Xiagong Chusheng)
Casting is a manufacturing process in which
a liquid material is usually poured into a mold, which contains a hollow cavity
of the desired shape, and then allowed to solidify. The solidified part is also
known as a casting, which is ejected or broken out of the mold to complete the
process. Casting materials are usually metals or various cold setting materials
that cure after mixing two or more components together; examples are epoxy,
concrete, plaster and clay. Casting is most often used for making complex
shapes that would be otherwise difficult or uneconomical to make by other methods.
Sand Casting method (Sand Casting)
Using Sand as Mold material, according to
the different components of Sand can be subdivided into wet Sand casting method
of Green Sand Mold), surface Dry Sand casting method (Dry Sand Mold), and so
on, but not all are available in the casting.
Advantage is lower cost, because the sand
mold use reusable;
We can supply big range of such sand
Casting Parts.
B.
Main particulars
MAIN
PARTICULARS
Material for product
carbon steel, alloy steel, stainless
steel, aluminum alloy, zinc alloy, brass, gray iron, nodular cast iron,
ductile Iron or other specified
Standard
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
Certificate
ISO9001
Dimension
As
per drawing, as large as we can
Processing
Step1:sand casting
Step2:turning, milling, drilling,
grinding, threading, CNC Machining, boring
Finishing
surface
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
Marking
as
per clients` requirements
Inspection
material,
construction, dimension, heat treatment, hardness, NDT
Quality
ISO9001,
PPAP control production
Lead
time
20-30
days for sample, consult with customer for mass production
Delivery
Express
for sample, ocean shipping/air for mass production
Our
Capabilities
CNC
machining, CNC center machining, drilling, milling, turning, grinding,
tapping, boring
Engineering
& manufacturing services
R&D
process, tooling and gauging design, product design
Integrated
CAD/CAM system, test and measuring
Others
Recyclable,
in line with environmental requirements and standards, and reliable
C.
Construction
Construction
by sand casting
D
Workmanship
The
workmanship have good production practice. Care are taken to ensure High
accuracy and smooth surfaces
E.
Certificates
-
Material certificates
-
Measuring reports
-
Inspection protocol
-
NDT reports
-
Fixed certificate: ISO9001 certificate
Our
service
Besides
above the general specifications, we can also supply some specific machining
parts as clients' requirements.
Package
and shipping
Sand Casting Parts,Oem Sand Casting Parts,Stainless Steel Sand Casting,Aluminum Sand Casting Parts Shinvast Industry Ltd , http://www.shinvastindustry.com