SUNTECH Knitted Fabric Inspection Machine with optional data collection and analysis system(4-point system) to handle a wide range of fabrics, from tension-sensitive elastomeric and lycra fabrics to stable woven, technical and upholstery materials. 03 sets of Scroll Roller &  01 set of Air-blowing device 1. Before inspection table, the scroll roller will make fabric open totally when inspection. - Unit Meter(M) and Yard(YD) optional - Error less than 0.1m/km - Pre-set length available 1) Low Tension Fabric Delivery and Speed Synchronization Unique mechanical and electric device combination for making fabric feeding, delivering and re-winding synchronous. 4) Stretch Fabric Control - with Scroll Roller System and De-curling System. Fabric controlled from input to electro/ pneumatic edge guilding system for perfect roll generation.
Left-hand full-thread bolt
Left-handed full-thread bolts are mainly used in mines where rock formations such as coal mines are not hard enough. bolts are generally used together with anchoring agents to achieve end anchoring or full anchoring in mines.
ANTO left-handed full-thread bolt is made of high-strength HRB500 or HRB600, which can provide high load-bearing capacity to protect mine safety.
Compared with other bolts, it can be installed using ordinary foreign drilling rigs, which saves installation costs.
Anto left-handed full-threaded anchor rod, the threads are distributed throughout the rod body, increasing the moving length of the nut, if the anchor rod support is loose in the later stage, tighten the nut, and the anchor rod restores the support force.
The one-way left-handed rebar bolt without longitudinal reinforcement can be used in all kinds of mines and underground projects, and is especially suitable for the support of coal tunnels with wire mesh. It has achieved good technical and economic effects.
The structural features of the anchor rod: the full length of the body has a rolled continuous thread, and the full length is of equal strength; the fastening end is provided with a prestressed gasket and a ball nut. It is superior to the bolt processed by round steel, and is a new type of bolt with material saving, labor saving and equal strength.
25mm Rebar Rock Bolt,25mm Rebar Bolt,25mm Threaded Steel Rock Bolt,25mm Steel Rebar Bolt anto mining equipment co.,Ltd , https://www.antobolts.com
Suntech Knitted Fabric Inspection Cutting Machine High Quality
Â
Model
ST-KFIM Open Width Knitted Fabric Inspection Machine
Fabric Width
1800mm-4000mm
Speed
5-54m/min
Standard Roll Diameter
500mm
Dimention(L*W*H)
3300x3100x2000mm(for model ST-KFIM-260 only)
Weight
1550kgs(for model ST-KFIM-260 only)
Electric Specs
3Phase-380V; 50Hz(can be adjusted to suit for different countries)
Remark
Variable working width is possible and can be tailor-made to your requirements of processing needs.Â
Features :
*Active Unwinding - tension control
Twin unwinding rollers are driven by motor, help fabric roll active unwinding. To avoid damage or tension caused by passive pull.
*Fabric End Stop Sensor >> -efficiency
It will allow for continuous fabric inspection, from one piece of roll to next, no need to feed fabric again.
*Dancing Roller - tension control
It will move up and down to control tension, ensuring speeds of feeding, inspecting and re-winding synchronized.
*Full Width Fabric Inspection >> -tension control
60 degree fixed angle inspection screen which has been verified thousand times with the least influence for fabric tension. It is the most suitable angle for knitted fabric.
*Scroll Roller - curled edge controlÂ
2. After inspection, the scroll roller will open fabric curled edges again to make sure a accurate edge-align.
3. Before rewinding, the scroll roller & Air-blowing device will once more open fabric and eliminate crease for perfect roll generation.
*Digital Counter Meter
*Edge-alignment Sensor
*Twin Rewinding RollerÂ
align the fabric edges accurately. When fabric declines, the rewinding station will move left or right for aligning.
Consistent roll output by actively surface rewinding with twin rubber-covered roller.
The roll compact could be adjust due to different ratio of the rollers. You could adjust the roll hardness (Loose or Tight) through the hand-wheel.
 Excellent Features of SUNTECH Garment Defects Fabric Inspection Method
2) Full Width Fabric Inspection - with 45 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options.
3) Accurate Fabric Length and Optional Weighing Machine. Fabric roll length and weight can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments.
Â
5) Consistent Roll Output - with Twin Rewinding Roller and Roll Hardness Adjustment Processed rolls are rewound with the minimum amount of tension and are consistent from roll to roll.
6) Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input and plait input and output.
7) Pneumatic Roll Ejection Device - Optional Heavy produced rolls can be pushed by the pneumatic cylinder arms so as to save labour power.
8) Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout.
9) Automatic Linear Cut ( Fabric Roll End Cutter) - Optional Full width cutting at the end of processed roll, fast and accurate.
About us
SUNTECH is one of the leading designers & manufacturers on textile machines for weaving & finishing units, especially for Fabric Make-up Machines and Material Storage & Handling Equipment.
Over 40 years experience, SUNTECH now has its brand office in HK and International sales office in Hangzhou. In addition, our factory is located in Ningbo city, Zhejiang, China.
Today,with more than 2500 customers and 6000 installations around the world, SUNTECH now has its agent network in Italy, Germany, Russia, Argentina, Colombia, Peru, Ecuador, Guatemala, Indonesia, Thailand, Philippines, India, Pakistan, Bangladesh, Sri Lanka, Uzbekistan, Iran,Egypt, South Africa, Syria, Mauritius, etc.
Our clients
Our service
Contact us 
FAQ
Q1: Is the machine have length counting? In Meter or Yard or Inch?
A1: Yes, Digital Counter Meter is installed on the machine which gives Meter counting or Yard counting.
The desired length also could be pre-set on the digital counter meter. When arrives at pre-set length, machine stops automatically.
Q2: How to feed fabric onto machine? Easy?
A2: Machine layout and drawing of feeding course will be supplied along with machine.
Q3: What is the electrical specs? Can it be used directly in my country?
A3: 3 phase, 380v and 50hz(can be adjusted to suit for different countries)
Q4: Is the control panel in English?
A4: Yes, English version for control panel and relevant operation manuals.
Q5: How long is the warranty? If any problems, how you solve it?
A5: 13 months from the date of shipment. If any quality problems within warranty, Suntech will responsible for it, and send new replacement free of charge.
Q6: Can we install it by ourselves? Overseas engineer is available?
A6: The machine will be shipped under assembled base, no need to install again.Â
Model NO.: ST-KFIM-01
Power: Special Model
Trademark: Suntech
Specification: 3300x3100x2000mm(for Model ST-KFIM-260)
Origin: China
HS Code: 8451500000