60 Ton Air Hydraulic Jack,Air Hydraulic Floor Jack,Hydraulic Electric Bottle Jack,Air Hydraulic Bottle Jack Wuxi Golden Boat Car Washing Equipment Co.,Ltd , https://www.carwashauto.com
JYS-03-09
Tube Size
Inlet32mm      oulet 25mm
Flow
23kg/min
Tube
surface treatment
Power coating
Qty
6pcs
Galvanization
Inner box
17*13*12.5cm
Chrome plating
Carton box
105*20.5*13.5cm
Pump body diameter
130mm
G.W./N W.:
24/23kg
Lift
5m
Three tube removable
Suction
1m
Rotation
70r/min
Inner box
36*15.5*13.8cm
Â
Â
Carton box
48*37*29cm
Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
  7.Can not be extracted water and acid and alkali chemical solution!
Â
JYS-03-09
Tube Size
Inlet32mm      oulet 25mm
Flow
23kg/min
Tube
surface treatment
Power coating
Qty
6pcs
Galvanization
Inner box
17*13*12.5cm
Chrome plating
Carton box
105*20.5*13.5cm
Pump body diameter
130mm
G.W./N W.:
24/23kg
Lift
5m
Three tube removable
Suction
1m
Rotation
70r/min
Inner box
36*15.5*13.8cm
Â
Â
Carton box
48*37*29cm
Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
  7.Can not be extracted water and acid and alkali chemical solution!
Â
Model NO.: JYS-03-09
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Specification: Pump body diameter 130mm
Origin: China
HS Code: 84312000
Model NO.: JYS-03-09
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Specification: Pump body diameter 130mm
Origin: China
HS Code: 84312000