Nox Sensor 24V For IVECO Car,Automobile sensor Iveco auto parts 12V Nox sensor is suitable for IVECO tail gas treatment.
Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.
The effects of Nox sensor damage are as follows:
1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.
2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.
3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on.
Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.
Nox Sensor 24V For IVECO Car,Iveco Automobile 24V Nox Sensor,Iveco Auto Parts 24V Nox Sensor,Iveco Automobile Sensor 24V Nox Sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Excellent Value, the New Epoch of Chinese Heavy Truck
JAC heavy-duty truck integrates global advanced technology. According to the different
markets, we innovate and optimize our products endlessly and continue to enrich our
lineup to satisfy various road conditions and our costumers' demands, enabling JAC
heavy truck to become a high-end heavy truck in the international market.
 Safety
The white body shell is designed in accordance with European safety standards. The energy absorption zone structure increases the anti-collision capability, thus guaranteeing passive safety;
Highly reliableÂ
All of the chassis components have undergone CAE finite element analysis to ensure the chassis strength. The strong chassis ensures security under high loading and fast speed working conditions;
Impressive Fuel Efficiency and Environmental PerformanceÂ
JAC heavy-duty trucking customers have found that they offer impressive fuel economy. Depending on load, road and driving style, it may be the best choice. Aerodynamic design feature, streamlined shape and curved surface contribute to less air drag and better fuel economy.
Local Modification for All Kinds of Environments and TemperaturesÂ
For maintaining outstanding performance in different environments and temperatures, JAC heavy trucks have been modified for alpine areas, high-temperature regions, low-temperature regions, and desert areas.
A complete range to choose fromÂ
JAC heavy-duty trucks are available with a variety of outputs and with Euro 4, Euro 3 and Euro 2 emission levels. This makes it possible for you to enjoy the unique styling, the special feeling and all the benefits of JAC heavy -duty trucks with an engine that fits your needs exactly.
Model
HFC4252K1R1
Drive mode
6*4 Tractor
Engine
Model
WD615.38
Emission levels
E-II
Max output power(Kw/rpm)
279/2400
Max torque(N·m/rpm)
1460/1400-1600
Transmission
Model
9JS150T-B
9 forward & 1 reverse
P.T.O
optional
Rear axle: ratio/loading capacity
Steyr technology 4.8/5.73, 13tons
Clutch
Single, dry plate, diaphragm, power assist
Braking system
Dual-circuit air brake, with exhaust assisted braking
Main Parameter
Overall dimension(mm)
6665*2495*3460/
3150
Wheelbase(mm)
3050+1350
GVW/GCW(Kg)
60000
Tire
11.00R20,,12.00R20,
12R22.5 ,13R22.5
Excellent Value, the New Epoch of Chinese Heavy Truck
JAC heavy-duty truck integrates global advanced technology. According to the different
markets, we innovate and optimize our products endlessly and continue to enrich our
lineup to satisfy various road conditions and our costumers' demands, enabling JAC
heavy truck to become a high-end heavy truck in the international market.
 Safety
The white body shell is designed in accordance with European safety standards. The energy absorption zone structure increases the anti-collision capability, thus guaranteeing passive safety;
Highly reliableÂ
All of the chassis components have undergone CAE finite element analysis to ensure the chassis strength. The strong chassis ensures security under high loading and fast speed working conditions;
Impressive Fuel Efficiency and Environmental PerformanceÂ
JAC heavy-duty trucking customers have found that they offer impressive fuel economy. Depending on load, road and driving style, it may be the best choice. Aerodynamic design feature, streamlined shape and curved surface contribute to less air drag and better fuel economy.
Local Modification for All Kinds of Environments and TemperaturesÂ
For maintaining outstanding performance in different environments and temperatures, JAC heavy trucks have been modified for alpine areas, high-temperature regions, low-temperature regions, and desert areas.
A complete range to choose fromÂ
JAC heavy-duty trucks are available with a variety of outputs and with Euro 4, Euro 3 and Euro 2 emission levels. This makes it possible for you to enjoy the unique styling, the special feeling and all the benefits of JAC heavy -duty trucks with an engine that fits your needs exactly.
Model
HFC4252K1R1
Drive mode
6*4 Tractor
Engine
Model
WD615.38
Emission levels
E-II
Max output power(Kw/rpm)
279/2400
Max torque(N·m/rpm)
1460/1400-1600
Transmission
Model
9JS150T-B
9 forward & 1 reverse
P.T.O
optional
Rear axle: ratio/loading capacity
Steyr technology 4.8/5.73, 13tons
Clutch
Single, dry plate, diaphragm, power assist
Braking system
Dual-circuit air brake, with exhaust assisted braking
Main Parameter
Overall dimension(mm)
6665*2495*3460/
3150
Wheelbase(mm)
3050+1350
GVW/GCW(Kg)
60000
Tire
11.00R20,,12.00R20,
12R22.5 ,13R22.5
Model NO.: HFC4252K1R1
Horsepower: 380
Engine Capacity: ＞8L
Tire Certification: ECE, GCC, ISO, DOT
Tire Design: Radial
Condition: New
Gross Weight: 70t
Trademark: JAC
Transport Package: Nude
Specification: 6665*2495*3460/ 3150
Origin: China
HS Code: 870120000
Model NO.: HFC4252K1R1
Horsepower: 380
Engine Capacity: ＞8L
Tire Certification: ECE, GCC, ISO, DOT
Tire Design: Radial
Condition: New
Gross Weight: 70t
Trademark: JAC
Transport Package: Nude
Specification: 6665*2495*3460/ 3150
Origin: China
HS Code: 870120000
JAC Heavy Duty Truck
JAC Heavy Duty Truck