2mm Single Screw PVC Edge Banding Tape Making Machine

The edge band in the form of roll has its thickness of 0.5-4mm,and width 2-300mm depending on the requirements.Its length is not limited.

This product is featured by its good banding effect,easy operation and high etilization rate,therefore it is applicable to mechanical banding of solid furniture,composite doors and WPC doors.

PVC edge band production line features:

1. material: ABS or PVC

2. width: 9mm to 180mm, your special requirement is also welcomed

3. thickness: 0.4mm to 3mm, welcome your specific requirement

4. special size could be designed

5. color: solid color or wood grain, color could be design according to customer

color sample

Equipment using environment for pvc edge banding tape production line

 

Copper Baler

The Hydraulic Copper Metal Baler is used for cold press metal scraps within 6-8mm in thickness under most circumstance. The processable material includes scrap steel, waste containers and disintegrated vehicle shell etc. After cold pressing into block, it is convenient for storage and transportation or putting into furnace. Hydraulic Metal Baler working principle: The metal scraps and other materials are placed in the workbin. The hydraulic cylinder works to suppress the pressure. The baled material is compressed and formed into various metal blocks.

Copper Shavings Baler, Copper Turnings Baler, Waste Copper Baler, Copper Wire Baler, Copper Scraps Baler

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com