Model NO.: MD-SW2040
Conductive Way: One-Sided
Welding Spot Number: Single
Type: Universal
Frequency: 20kHz
Welding Time: 0.01-9.99 Sec
Max Welding Area: 100 Sqmm
Generator Type: Digital Automatic Frequency Tracking
Function: Output Amplitude Can Be Adjusted From 5% to 100%
Pneumatic Pressure: 0.3-0.6MPa
Warranty: One Year
Power: 4000W
Trademark: MD
Transport Package: Wooden Box
Origin: Guangdong
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug
Ultrasonic Metal Spot Welding is a well-developed and established production method for joining non-ferrous metals. Especially in the automobile industry, this reliable and trend-setting technology has been used in the production of wire harnesses for decades now. Ultrasonic metal welding is a cold, friction welding process, i.e. no liquid-melt phase occurs. The parts being joined are rubbed together at their contact surfaces under slight pressure.
Compared with crimping or resistance welding, this process offers numerous advantages. Besides the excellent electrical properties of the joint and the extremely low energy consumption, this method is particularly characterized by comprehensive process control and process data management.
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug
Ultrasonic Welding Principle:
  1. Ultrasonic metal welding machine use ultrasonic frequency vibration principle to change ultrasonic vibration energy into friction energy and transfer to the metal surface to be welded ,while the friction produces heat under the pressure, the metal structure of molecules fully activation of the fusion between the molecular layer of the formation of the new equipment.
Features
  1. Microcomputer control, electronic tuning frequency.
  2. Power adjustable, operate simple, and run stable and reliable.
  3. LED display keeps the machine visible in operation and regulation.
  4. Imported components, good performance in energy output.
  5. Overcurrent protection and soft start can keep the machine safe.
  6. Easy installation and operation.
Specification
Frequency 20kHz Nominal
Power Available in: 2000 W ~5000W
Source Voltage AC 110/220±10% V 50/60±10% Hz
Generator Type Digital automatic frequency tracking, generator can be adjusted the output amplitude from 5% to 100%
Max. Welding Thickness 8mm
Application 1. Solenoid switch, fuseless switch: big currency joint point
welding and dissimilar metal welding
2. Terminal, connector, electric parts welding
3. Copper and aluminum plate joints
Pneumatic Pressure 0.3~0.6MPa
Size Controller: 420mm(L) * 380mm(W) *200mm(H)
Welder: 510mm(L) *280mm(W) *210mm(H)
Weight Welder : 35~50kg, Controller : 10kg
Warranty One year warranty with lifetime support
Advantages
  1. High-quality ultrasonic transducer, strong power, good stability.
  2. Good conductivity and resistivity very low or almost near to zero.
  3. Oxidation or plating metal can be welded.
  4. Short weld time, no need additional flux, gas, solder.
  5. No welding sparks, environment protection and safety.
  6. Without the need for frequent replacement of amplifier due to stepless adjustment of the amplitude.
  7. Low energy consumption, high efficiency, no distortion, no pollution, welding firm, and convenient operation.
  8. Welding material does not melt non-fragile metal properties.
  9. Pairs of welding metal surfaces that require low, oxidation or plating can be welded.   
Application area
  1. Multi-layer positive and negative electrode welding for dynamic power battery
  2. welding material does not melt, non-fragile metal properties.
  3. Li-ion battery and polymer battery: Copper foil welds nickel sheet; Aluminum foil welds aluminum sheet; Aluminum foil welds Nickle sheet.
  4. Auto splice welding, Formation of electric wire end, Welding for electric wires; Multiple electric wires bond welding.
  5. Electric wire and cable welding, terminal, connector, electric parts welding.
  6. Solar panel battery, flat solar plate, copper and aluminum plate joints.
  7. Solenoid switch, fuseless switch: big currency joint point welding and dissimilar metal welding.
  8. Refrigerator and air conditioner copper tube sealing. Vacuum parts of copper tube and aluminum tube sealing.
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug

Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug
Ultrasonic Metal Welding Machine for Electrical Wire to Terminal Lug

Fresh Air System

Fresh Air System,Fresh Air System AC motor,Fresh Air DC motor,Fresh Air Ventilation System

Fresh Air System,Fresh Air System AC motor,Fresh Air DC motor,Fresh Air Ventilation System

Minzhuo Electric Co.,Ltd. , https://www.gdminzhuo.com

Posted on