Stamping parts: The most used in hardware processing refers to the molds for steel/non-ferrous metals and other plates at room temperature, which are formed into a specified shape by the pressure required for processing by a press. Automobile shock absorbers are mainly used to suppress the shock of the spring and the impact from the road surface when the spring rebounds after shock absorption. When passing on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will reciprocate, and the car shock absorber is used to suppress the jump of this spring. If the shock absorber is too soft, the body will jump up and down. If the shock absorber is too hard, it will bring too much resistance and prevent the spring from working properly. In the process of modifying the suspension system, the hard shock absorber should be matched with the hard spring, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder automotive shock absorber stamping parts. A device connected to the vibration-inducing crankshaft to counteract the torsional vibration of the crankshaft (that is, the phenomenon that the crankshaft is twisted by the impact of the ignition of the cylinder) Stamping parts bracket,Shock Absorber Parts Ningbo Huilexin Technology Co.LTD , https://www.oemshockabsorbers.com
Wuxi Cummins Turbocharger 6 Million Turbo Bodies Downline
Relevant person in charge mentioned that the principle of “putting customers first†is to support the foundation of rapid development of Cummins in Wuxi, and is committed to promoting a “customer-oriented†culture, tailoring solutions according to customers’ proprietary needs. And service strategy. To this end, Wuxi Cummins has also established a customer group for each customer. The customer team is composed of technicians, quality personnel and application personnel, service personnel and account managers to quickly respond to customer needs and provide customers with proprietary solutions.
On November 3, 2011, the 600,000 turbochargers of Wuxi Cummins Turbo Technology went offline, and the new supercharger production line was put into production at the same time.
Mr. Chen Hua, General Manager of Wuxi Cummins Turbocharger Technology Co., Ltd. said: “The 6 million turbocharger was formally off the assembly line today, marking that Wuxi Cummins has reached and exceeded our established target in terms of capacity utilization rate. It is also guided by the market demand, which also reflects the strong demand for turbochargers in the Chinese market.The official launch of the new production line is another milestone event for the company. The company builds new production lines in response to market demand and fully meets customer needs. It is technically world-class and uses robots to automatically detect the supercharger angle, and uses an image recognition system for error prevention."
It is understood that since its establishment in 1996, Wuxi Cummins has achieved an annual output of more than one million turbochargers with a high growth rate, accounting for nearly half of the domestic market share. Wuxi Cummins continuously supports its customers with local R&D centers, world-class production equipment, strict quality assurance systems, well-trained employees, preferred suppliers, and continuous improvement concepts.