As an important form of Centrifugal Pump, double suction pump is widely used in engineering because of its high lift and large flow. The impeller of this pump type is actually a combination of two back-to-back impellers, and the water flow from the impellers merges into a volute. The double-suction pump has the following characteristics: it is equivalent to two single-suction impellers of the same diameter working at the same time, and the flow rate can be doubled under the same outer diameter of the impeller; the pump casing is horizontally opened, which is convenient for inspection and maintenance. The inlet and outlet of the suction pump are in the same direction and perpendicular to the pump shaft, which is conducive to the arrangement and installation of the pump and the inlet and outlet pipes; the impeller structure of the double suction pump is symmetrical, there is no axial force, and the operation is relatively stable. Double Suction Pump,Double Suction Centrifugal Pump,Double Suction Water Pump,Carbamide Pump Jiangsu Qiantu Trading Co., Ltd. , https://www.pumpqt.com Product number Maximum weighing Fork length Fork length A Fork outer width B Fork outer width C Single fork width D HL12270 ordinary steel 1.0t/2.0t/2.5t 77-195mm 1220mm 700mm 340mm 180mm HL11556 ordinary steel 1.0t/2.0t/2.5t 77-195mm 1150mm 560mm 200mm 180mm HL7044 ordinary steel 1.0t/2.0t/1.5t 77-195mm 700mm 440mm 200mm 120mm Custom electronic forklift scale 5.0t custom made custom made custom made custom made custom made