What are the common brake system problems for refrigerated trucks?

What are the common brake system problems for refrigerated trucks?

1, the phenomenon of failure: step on the refrigerated car brake pedal, pedal does not rise, no resistance;

Determine the reason: check whether the brake fluid is missing; whether there is oil leakage in the brake cylinder, pipeline and joints; whether the main pump, pump parts are damaged;

2, the phenomenon of failure: the brake pedal stepped in the end, the brake effect is not good; continuous braking, the effect did not improve, and the pedal gradually increased;

Reason for judgment: The brake system is mixed with gas;

3, the phenomenon of failure: continuous brake pedal, pedal back to increase, the brake effect has improved;

Reason for judgment: The gap between the friction plate and the brake drum is too large;

4, the phenomenon of failure: continuous brakes, pedal position, and a sense of subsidence;

Reason for judgment: oil leakage;

5, the phenomenon of failure: the pedal position is very low; then step, the location can not be increased, feeling hard;

To determine the reason: the total pump is blocked;

6, the phenomenon of failure: pedal height is normal, not soft not sink, but the brake effect is not good;

To determine the reason: friction plate and brake drum clearance is too large or oily;

7, failure phenomenon: brake deviation;

To determine the reason: if the refrigerated truck skews to the left, it will not work properly for the right wheel, and vice versa;

8, failure phenomenon: refrigerated truck driving mileage, brake drum (disc) heating;

To determine the reason: check the master cylinder, brake cylinder or pipeline;

9, the phenomenon of failure: brake pedal free travel too small;

Judgment reason: need to adjust;

10. Failure phenomenon: The brake fluid picks up slowly;

Determine the reason: Loosen the bleeder screw and observe the brake shoe return. If the brake shoe returns, the tubing should be dredged; if the brake shoe does not return, the brake cylinder should be disassembled.

More refrigerated truck information quotes welcome to consult factory hotline

Mining Wear Parts

Mining Wear Part Mineral Resouces

Mining Wear Parts are used for all kinds of crusher machines in mining industry.The Mining Crusher is subject to wear and tear during operation, so mining wear parts must be replaced to ensure normal operation of machinery.Mining wear parts can protect the machines, reduce wear, prolong life, reduce cost,and improve efficiency.

TyCrusher Parts equips specialist laboratory,introduces advanced experimental facility and technology, processes world-leading, examination and management technique. We are capable of environment simulation test. Asdomestically leading inspection center of castings and relative products, we deeply know that every client has the most demanding requirements to their products. So we always regard quality assurance as the most crucial part of whole production process.

Mining Wear Parts,Mining Wear Parts Spare Part,Commercial Mining Wearpart, Mining Crusher Spare Parts

Guangzhou Tianyu Machinery Equipment Co., Ltd. , https://www.tycrusherpart.com