The correct operation of the multi-layer thickener should be: Tubeless Snap-In Valve,Clamp-In Tire Valve Air Chuck ,Rubber Snap-In Tire Valve Stem,Snap In Tire Valve Stem Ningbo Zonhom Automotive Co.,Ltd , https://www.nbzonhom-tpms.com
1. As for the discharge concentration of the multi-layer thickener, the lower layer is easier to control than other layers. The control method is generally achieved by controlling the water level of the water tank, the height of the tweezers, and changing the motor speed.
2. The single-layer thickener for dewatering and thickening before multi-layer washing thickener should be uniformly and continuously discharged to ensure uniform feeding of multi-layer thickener and avoid overflow run.
3. The multi-layer thickener should be kept in a dynamic equilibrium state, and the balance should be balanced as much as possible to ensure the washing efficiency. When continuous discharge is not possible, the shorter the interruption time, the better.
4. When the multi-layer thickener increases the ore amount for a long time and the fluctuation range is large, the amount of washing water should be increased proportionally to ensure the washing efficiency.
5. In order to accelerate the sedimentation of the slime, ensure the discharge concentration and improve the washing efficiency, the flocculant may be appropriately added according to the amount of the mud.