Introduction: There are many brake motors in the market. How to choose a good brake motor?

How to choose a brake motor?

Buy brake motors, consider the following aspects:

1. The braking effect of the motor. A good brake must be durable.

2. The speed of the brakes. Currently on the market brake motors have AC brakes and DC brakes. DC brake speed is approximately 0.20-0.30 seconds, AC brake brake speed is 0.002-0.003 seconds. AC brakes are faster because brakes have different brake configurations.

3. The frequency of braking. Some industries have higher requirements for braking, and they need to brake for about 40 minutes a minute. It is difficult for general brake motors to meet the requirements. The main reason is that because of such long-term operation, the brake pads will be very hot, and if the temperature is too high, they will slip. Can cause the brake coil to burn. At present, this requires that the domestic technology is still not reachable and imports are slightly better.

4. Torque of the motor, a good motor, must be sufficient power, torque.

5. Service life: The brake motor can be used in general conditions: 1-8 years, according to the use of customer equipment.

6. Particularity of equipment: Use under harsh conditions: For example, dust, corrosive, water intrusion, etc. This is determined by the degree of protection of the motor itself.

Di-Tert-Butyl Peroxide

Di-Tert-Butyl Peroxide,Tert-Butyl Peroxide,Bis(Tert-Butyl) Peroxide,Dtbp Di-Tert-Butyl Peroxide

Jiangsu Zhongluman New Material Technology Co., Ltd , https://www.rozhmch.com

Posted on