DC 12 V Truck Winch with Pulling of 12000 Lb

Classic design and Popular winch model in the current market .Classic design ,excellent performance ,durable & big pulling ,but cheap price ,which are the top choice for customers .  brute torque  fast speed series wound motor sealed , 3 stage gear driven train with all steel gears , Sliding ring gear for "engage" and "disengage" though roating cluch lever . New design with no-interference wireless remote . Working at extreme hard condition , low noise ,small amps .Top recovery equipment for off-road . They are available of pulling ranges from 8500lbs-12500lbs . Welcome to further inquiries !

 

OEM is available 

 

Synthetic rope & aluminum fairlead are available for this model !

 

12000LBS Features and Specifications :

1) Single Line Rated Pull: 12, 000lbs (5, 443kgs)
2) Motor: 6.0HP/4.5V  input , series wound
3) Control: Remote switch, 12ft ( 3.7m) lead
4) Geartrain: 3-stage planetary
5) Gear Reduction Ratio: 265: 1
6) Clutch: Sliding ring gear
7) Braking Action: Automatic in-the-drum
8) Drum size: Diameter: 2.52" (64mm), length: 8.82" (224mm)
9) Cable: 88ft of 3/8" diameter (27m of 9.5mm diameter)
10) Fairlead: 4-way roller fairlead
11) Battery: Recommended: 650CCA minimum for winching
12) Battery Leads: 2 gauge, 72" (1.83m)
13) Colors: Black/dark gray
14) Weight: Net weight: 88lbs (37kg), gross weight: 95lbs (41kg)
15) Mounting Bolt Pattern: 10.00 ± 0.015 X 4.50 ± 0.010" (254 X 114.3mm)

Classic design and Popular winch model in the current market .Classic design ,excellent performance ,durable & big pulling ,but cheap price ,which are the top choice for customers .  brute torque  fast speed series wound motor sealed , 3 stage gear driven train with all steel gears , Sliding ring gear for "engage" and "disengage" though roating cluch lever . New design with no-interference wireless remote . Working at extreme hard condition , low noise ,small amps .Top recovery equipment for off-road . They are available of pulling ranges from 8500lbs-12500lbs . Welcome to further inquiries !

 

OEM is available 

 

Synthetic rope & aluminum fairlead are available for this model !

 

12000LBS Features and Specifications :

1) Single Line Rated Pull: 12, 000lbs (5, 443kgs)
2) Motor: 6.0HP/4.5V  input , series wound
3) Control: Remote switch, 12ft ( 3.7m) lead
4) Geartrain: 3-stage planetary
5) Gear Reduction Ratio: 265: 1
6) Clutch: Sliding ring gear
7) Braking Action: Automatic in-the-drum
8) Drum size: Diameter: 2.52" (64mm), length: 8.82" (224mm)
9) Cable: 88ft of 3/8" diameter (27m of 9.5mm diameter)
10) Fairlead: 4-way roller fairlead
11) Battery: Recommended: 650CCA minimum for winching
12) Battery Leads: 2 gauge, 72" (1.83m)
13) Colors: Black/dark gray
14) Weight: Net weight: 88lbs (37kg), gross weight: 95lbs (41kg)
15) Mounting Bolt Pattern: 10.00 ± 0.015 X 4.50 ± 0.010" (254 X 114.3mm)

Air Source Heat Pump
Cooling capacity: 20kW-50kW

Characteristics:
1.Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3.Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material.
5.Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6.Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional).
7.Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8.Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9.Electric panel. Consists of:
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10.Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed
Stainless steel covering
Remote condenser
Tube in tube heat exchanger

Water circuit electric heater

Air Source Heat Pump

Air Source Heat Pump,Hot Water Air Source Heat Pump,Heating Air Source Heat Pump,Scroll Air Source Heat Pump

Jinan Amrta Air Conditioning Co.,Ltd , http://www.amrtaac.com