1. The sulfur dioxide test chamber should be installed in a room with clean air, no direct sunlight, no strong electromagnetic field and radiant energy, and small changes in ambient temperature. In order to ensure the temperature control accuracy of the carbon dioxide incubator, it is recommended to use it in the environment of 15 °C - 25 °C. 2. When the cylinder pressure is less than 1Mpa, it should be replaced in time. When replacing the cylinder, the cylinder switch should be closed first, the pressure reducing valve screw shaft should be loosened, and the pressure reducing valve should be removed and reinstalled on the new cylinder. 3. When the difference between the ambient temperature and the set temperature is less than (RT 5 °C), the air conditioner is used to reduce the ambient temperature. During the whole process of the culture, there should be no obvious change in the ambient temperature, otherwise the carbon dioxide will be caused by the change of the ambient temperature. The temperature control in the incubator is not allowed. 4. Read the instruction manual before starting the machine, master the correct use method, pay special attention to the cylinder before opening, be sure to loosen the pressure reducing valve to prevent the gas hose from blasting. 5. During use, the pressure output of the pressure reducing valve and the flow rate of the two flow meters should be monitored frequently. Do not arbitrarily twist the various valves in the control box. If there is a deviation in the concentration of the carbon dioxide incubator, you should first find out the reasons for the inaccuracy of the relevant values ​​before you can make a slight adjustment. 6. When using the machine for the first time or after reusing the machine for a long time, it should be operated according to the requirements of Articles 1 to 3 of the method of use, especially when it is officially cultivated. 7. When opening the inner door of the box, first turn off the carbon dioxide control switch. After closing the door, when the CO2 concentration display shows “0.0â€, turn on the CO2 control switch. 8. When opening the glass door, it should be operated according to the use method 3 to prevent the “overshoot†phenomenon caused by the accumulation when the temperature and CO2 concentration in the tank are restored. 9. The sulfur dioxide test chamber should have a good grounding device to ensure safety.
Industrial aluminum profiles refer to aluminum alloy materials used in industrial production and construction fields, which have the characteristics of corrosion resistance, and easy processing. Industrial aluminum profiles have many advantages, such as light weight,high strength and good thermal conductivity.In addition, industrial aluminum profiles also have good plasticity and can be processed and assembled through processes such as extrusion and stamping to meet different design requirements. Industrial aluminum profiles have a wide range of applications in industrial production and construction fields. It can be used to manufacture structural components of mechanical equipment, guide rails for conveying equipment, and frames for automation equipment. Due to its excellent performance and flexible design, industrial aluminum profiles have been widely applied and promoted in various fields.
Industrial Aluminum Profile,Heat Sink Extruded Aluminium Frame,Anodized Heatsink Aluminium Profile,Extruded Heatsink Aluminum Profile FOSHAN WINKAI ALUMINIUM CO.,LTD , https://www.winkaialu.com
Precautions:
The sulfur dioxide test chamber can assess the corrosion resistance of materials and their protective layers, as well as the process quality of similar protective layers.