• Model NO.: XJ-250
  • Condition: New
  • Automatic Grade: Automatic
  • Warranty: 1 Year
  • Weight: <50 Tons
  • Type of General Rubber Machinery: Rubber Extruder
  • Power: 10~100kw
  • Trademark: YADONG
  • Specification: ISO STANDARD
  • HS Code: 84778000
  • Certification: CE, ISO
  • Customized: Customized
  • Structure: Vertical
  • Voltage: 415V
  • Type: General Rubber Machinery
  • Type of Tire Machinery: Rubber Regeneration Machinery
  • Using Life: >15 Years
  • Transport Package: Wooden Case
  • Origin: China
1. The extruder is used to extrude tread, inner tube, hose, and a variety of rubber type strips of rubber machinery, and also for covering the cable and wire products. Common-screw extruder, plastic material with the rotation of the extruder screw it at work, mixing in a drum machine, mixed plastics and pressed, and then move to the carriage direction, and finally squeezed from the mouth a certain shape of the product.

2. Rubber extruder, is one of the basic equipment for the rubber industry, is one of the key equipment of the impact on product quality plays a very important role in the production process of the tire and rubber products. The development experience of the foreign rubber extruder piston extruder, screw-type heat feed extruder, the common cold feed extruder, main and auxiliary threads cold feed extruder, cold feed exhaust squeeze machine, pin cold feed extruders, compounding extruder stage.
ITEM
MODEL		 XJ-65 XJ-85 XJ-115 XJ-150 XJ-200 XJ-250
SCREW  DIA. MM 65 85 115 150 200 250
L/D  RATIO   4 4.8 4.8 4.4 4.4 4.5
SCREW  SPEED R/MIN 20, 27, 35, 47 28, 40, 52, 72 20-60 10-81 10-64 10-56.3
MOTOR  POWER KW 7.5 15 37 55 90 110
CAPACITY KG/H 50-80 62-270 100-420 800 1500-2200 3600
OVERALL  DIMENSIONS L*W*H
MM		 1594*604*1053 2065*760*1154 2770*655*1350 3411*814*1470 4549*1140*1750 4950*1150*1483
ABOUT  WEIGHT  TON 1.2 2.6 4 4.8 6.8 9

Honing steels are used by lightly placing the near edge of the blade against the base of the steel, then sliding the blade away from yourself along the steel while moving it down – the blade moves diagonally, while the steel remains stationary. This should be done with the blade held at an angle to the steel, usually about 20°, and repeating on the opposite side at the same angle. This is repeated five to ten times per side

Honing Rod

Honing Rod,Cuchilleria Honing Rod,Alumina Honing Rod,Honing Steel Rod

Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com

Posted on