Hexagonal Wire Mesh,Galvanized Hexagonal Wire Mesh,Plastic Coated Galvanized Chicken Wire Mesh,Small Hole Hexagonal Wire Mesh HEBEI CONQUER HARDWARE WIRE MESH CO.,LTD , https://www.conquerwiremesh.com
High temperature float level gauge maintenance:
  The high-temperature float level gauge uses a diffusion silicon pressure sensor to fully seal the structure. High reliability, good stability; suitable for oil level measurement of open and floating roof tanks. The oil density can be set on site, with heavy self-compensation function; applicable to the measurement of liquid level of corrosive liquids in the fields of petroleum, chemical, environmental protection, etc.; applicable to the measurement of high temperature liquids; applicable to water companies and reservoirs , water towers, urban water supply and drainage, wells, reservoir water level measurement; with "intrinsically safe" performance, can be installed in the "0" zone.
  High-temperature float level gauge installation and maintenance
1. The level gauge installation must be vertical to ensure that the float assembly moves freely up and down in the main tube.
2. It is advisable to install a shut-off valve between the container and the level gauge in order to clean and inspect the liquid level and cut off the material.
3. The proximity of the magnetizer is not allowed around the main tube of the level gauge, otherwise it will directly affect the normal operation of the level gauge.
4. After installation of the liquid level gauge, it is necessary to use magnetic steel for correction. Guide the column once to make red below the zero position and white above the zero position.
5. When the level gauge is put into operation, the lower inlet valve should be opened to allow the liquid medium to enter the main tube smoothly, avoiding the liquid medium with the floating ball assembly to rise rapidly, causing the column to turn black and failing or turning over (if this phenomenon occurs) After the level of decay is stable, the steel can be recalibrated.)
6. In order not to damage the float ball assembly during transportation, the float ball assembly is taken out of the main body of the small liquid level gauge before leaving the factory. After the liquid level gauge is installed, open the bottom drain flange and reinstall the float ball assembly into the main tube. Pay attention to the weight of the float ball assembly facing upwards.
7, according to the media, can periodically open the sewage cleaning flange to clean the body of precipitation material.
Mingyu Automatic Control Equipment Co., Ltd. specializes in manufacturing magnetic flap level gauges, pressure calibration tables, benchtop pressure pumps, electromagnetic flowmeters, pressure calibrators, and manual hydraulic sources.
(1) The equipment must achieve neat, clean, sturdy, lubricated, job-related content such as anti-corrosion and safety of construction machinery, work methods, used tools and materials, standards achieved, and precautions;
(2) The parts, methods and standards of daily sunshine machinery inspection and maintenance and periodic inspections;
(3) Inspection and evaluation of the contents and methods of the maintenance worker's degree of maintenance equipment, glass machinery, etc.