Propylene glycol is an important raw material for unsaturated polyester, epoxy Resin, and polyurethane resin. The amount in this area accounts for about 45% of the total consumption of propylene glycol. This unsaturated polyester is used in large quantities for surface coatings and reinforced plastics.
Propylene Glycol,Mono Propylene Glycol,PG 99.5% HENAN JINHE INDUSTRY CO.,LTD , https://www.speciatyelement.com
The De-coiler
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
Technical parameters of export standard roof roll forming machine:
1 Main motor power: 5.5KW
2 Hydraulic station power: 4KW
3 Hydraulic oil pump: CB-E310
4 Sprocket: P-25.4
5 Roller station: 16
6 Yield strength: 32MPa
7 Diameter of principal axis: 80MM (add a key between axle and roller to fix)
8 Material of roller: C45steel hard chrome plating
9 Processing speed: 8-15m/min(we can do 15m/min also, but we recommend 8m/min)
10 Thickness: 0.2-1.0mm
11 Installation dimension about(L*W*H): 9.2*1.5*1.4M
12 Total weight: About 6.6T
13 Equipment parts includes: Decoiler (capacity 8t), roll forming system, hydraulic system, PLC frequency conversion control system, the sensor of length, cutting system.
14 The temperature range of working line: -35— 50
Working Flow
Decoiler → front shear (require or not) → guiding unit → roll forming unit → rear shear → finished product supporter/ (stacking unit)
parameters
No
Item
Description
1
Raw material
Material type
Color coating steel
Thickness
0.3-0.8 (mm)
Yield Strength
230-300Mpa
Width
1092(mm)
weight
5(tons)
Coil OD
Φ1350mm
Coil ID
Φ508 mm/Φ610mm
2
decoiler
Expanding
Hydraulic
Releasing
Hydraulic
Speed control
Light control
power
//
3
Roll forming system
Guiding
1 set
Filming device
//
Pre-cutting
Require or not
Lubricating device
//
Roll forming
1 set
Post cutting
1 set
No of roller station
About 20
Roller material
No 45 steel
Forming speed
30 (m/min)
Power
About 7.5 kw
4
Power source
AC380V,50Hz,3 Phase
5
Total power (kw)
About 11
6
Machine dimension (L×W×H, m)
See layout
Components of whole set roof roll forming machine: