Geothermal radiation heating, referred to as floor heating, has many characteristics such as comfort, energy saving and environmental protection compared with traditional heating methods. At present, geothermal heating is used in more than 50% of new buildings in developed countries such as Korea, Japan, Europe and the United States.

Floor heating is also a new type of heating method that has begun to rise in the north of the Yellow River in recent years in China. It has been widely used in China's Shandong, Tianjin, Northeast, Inner Mongolia and Hebei. For example, in Tianjin, ground heating has accounted for 40% of new buildings and has been generally welcomed by residents. The Chinese government has listed ground heating as a building energy-saving technology that has been popularized and applied. From the perspective of development prospects, more than 60% of the residents of the future will adopt ground heating. The application prospects are promising and there is a huge development market.

1. Heat dissipation is uniform and comfortable The heating principle of the heating system is radiant heat transfer. Compared with air conditioning, heating, etc. through forced convective circulation hot air heating, the dust flow in the air is much smaller, reducing the spread of harmful bacteria in the air, indoor environment It is more hygienic and clean. The floor warming system also creatively uses the warmth of the human body. The care from the feet makes you feel more comfortable and your family is full of warmth.

2. Clean and healthy warming system can effectively promote blood circulation in the foot, thereby improving systemic blood circulation, promoting metabolism, and inhibiting cardiovascular diseases. It is particularly suitable for the elderly and children, especially for patients with arthritis and old cold legs. Control efficacy. And to a certain extent to improve their immune capacity.

3. Energy-saving heating and cooling system Compared with the traditional convection heating method, the energy-saving rate is about 30%. In the process of the heating, the heat loss is small and the heat concentration is within the height of human body benefit, even if the indoor set temperature is higher than the convection heating. The low 2°C~5°C mode can also make people feel the same warmth. The floor heating can fully save energy, and it will not emit any noise or dust. It is a very environmentally friendly and energy-saving product.

4, beautiful and generous After the installation of the entire system, the interior no longer have radiators and its branches, virtually increase the indoor use of 2% to 3%, not only to facilitate the decoration and furniture layout, for tens of thousands of yuan per square meter of housing prices, no doubt It is for you to save tens of thousands of dollars.

5, safe and reliable warm resistance to acid and alkali salt corrosion, high pressure, high temperature resistance, penetration resistance, no rust, no tube scaling, tube to maintain smooth, small friction, maintain good water quality, is a non-toxic environmentally friendly products .

6, long life to warm the service life of up to 50 years or more almost the same as the life of the building, greatly reducing the radiator running, running, drip, leaking and maintenance, etc. to bring trouble to residents.

7. Highly efficient sound insulation At present, Chinese prefabricated slabs or cast-in-place slabs are generally used. The sound insulation effect is poor. Moving upstairs will affect the downstairs. The use of floor heating will increase the insulation layer. It will have very good sound insulation and reduce noise pollution. There is no noise in the heating process, which is beneficial to the family's physical and mental health.

Spandex Warping Machine

Spandex Warping Machine

Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.

A-ZEN spandex warping machine AZE318 with vertical creel is driven by 5 sets high performance servo motors and adopted with advanced precisive laser to measure distance so that spandex warping is more stable, well equipped with and easier to operate. It is suitable for warping all kinds of spandex, especially for requirement of knitting high quality elastic textiles.

Technical Data:

Warp Line Speed: 100-600m/min;

Beam Size: Φ21"*21";

Warping ends: According to customers` demand;

Pre-drafting: 0-200%; Final Draft: 15-100%;

Brake time less than 0.6 s, the deviation of stop synchronization is less than 3%;

Creel Capacity: 616, 700, 728, 784, 792, 896, etc.

Servo Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft Roller 4.6KW, Creel: 2*6.9KW;

Main Motor: 10KW AC frequency conversion control;

Control Mode: Computerized real-time control, and user-friendly operation interface.

Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine

CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.tricotmachinery.com

Posted on