This newspaper (Reporter Weng Guojuan) After more than six months of in-depth investigation and repeated argumentation amendments????????? 005 years 2010???the storage plan of oil storage (oil depot) facilities" was officially issued and implemented in recent days. This plan will become the main basis for the construction of a refined oil storage (oil depot) facility in Zhejiang Province in the future.

The "plan" clearly stipulates that all newly built, relocated, reconstructed, and expanded oil depots shall be subject to macro-control in accordance with the planning requirements, and that provincial-level economic and trade departments shall be responsible for the examination and approval; any oil depot that does not meet the requirements shall be closed within a time limit; To build and renovate oil depots, it is necessary to increase the support for major transformations; and to strictly investigate and punish unauthorized conversion of its storage facilities into refined oil storage and transportation facilities.

Excavator Cylinder Piston Seals

Precautions for the installation of hydraulic cylinder piston seals in excavators
1. The sealing of the oil cylinder piston should use products of reliable quality to ensure good sealing performance.
2.Before installing the oil cylinder piston seal, the seal and sealing groove should be cleaned to ensure that the sealing surface is free of impurities.
3. When installing the seal, the correct installation sequence and direction should be carried out according to the drawing requirements to ensure the correct installation of the seal.
4.When installing the seal, special tools should be used to avoid using sharp tools and hard objects to damage the seal.
5. When installing the seal, attention should be paid to whether the seal groove is damaged or worn. If so, it should be replaced or repaired in a timely manner.
6. When installing the seal, an appropriate amount of lubricating oil should be applied to avoid friction damage to the seal during installation.
7.When installing the seal, it should be ensured that the compression of the sealing ring meets the requirements to avoid excessive or insufficient compression leading to seal failure.
8.After installing the seal, a sealing test should be conducted to ensure that the sealing performance meets the requirements.


Hydraulic cylinder piston seals, hydraulic cylinder seal, boom seal

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com

Posted on