Automatic CNC lathe than ordinary machine tools in what is better?
First, the processing accuracy is constantly improving. Because the automatic CNC lathe is installed through the intelligent program to process the operation, so that the accuracy of the gatekeeper will be more rigorous, so that the quality and quality of processed products will have a significant improvement. Therefore, the process of promoting this in the market to bring the customer's choice is also more trustworthy. Cnc Lathes,Cnc Flat Bed Lathe,Heavy Duty Vertical Lathes,Cnc Flat Bed Lathe Machines Ningbo Yien Machinery Co., Ltd , https://www.nbyienmachinery.com
2. Turn the low power objective lens directly under the lens barrel so that it is approximately 1 cm from the stage. Then raise the condenser to the highest height, the aperture to the maximum, then one side from the eyepiece, one side of the mirror, the light of the light source as much as possible reflected to the condenser (if the microscope has a light source, this step can Omitted);
3. Take a drop of water from the pond on a clean glass slide, add a cover glass, and blot the water on the slide with water-absorptive paper for microscope observation;
4. Place the slide on the microscope stage, and place the sample to be viewed directly under the low magnification lens. Slowly lower the lens barrel so that the lens is spaced about 0.3 centimeters from the slide, close the aperture and lower the spotlight. , so that the lighting is not too strong nor too weak;
5. Observe with the eyepiece while moving the slide. At this point the lens barrel can only rise and cannot be lowered, otherwise it will crush the slide. When the image is observed and can move with the slide moving, it is the object to be observed. Should be able to observe the microorganisms swimming in the water;
6, if you need to use high-power lens observation, only need to replace the high magnification objective lens to the bottom of the lens tube, slightly turning the fine-tuning knob for a good focal length.
Second, the applicable processing application scenarios will become more and more extensive. With a more prominent level of fully automatic technology, then in the different processing application scenarios can be affirmed. Therefore, when comparing, the performance advantages in all aspects will be more and more diversified, and the choice brought to the customer will be more assured. Only through the comparison of processing application scenarios, the advantages will be more prominent.
Third, the processing efficiency continues to improve, can be repeatedly processed many times, to ensure that the quality in all aspects will be higher and higher. This is also the fully automatic CNC lathe in the design of all should go to understand the aspects. As in the process of comparing ordinary machine tools, it is found that the technical performance in all aspects will be different, and the choice for customers will be different, which can be seen in the analysis of the technical advantages and characteristics.
1. If the microscope is not equipped with a light source, place the microscope on a stable countertop, facing a large window (if the light is not good, use an incandescent or fluorescent lamp as the light source);