Panel And Sheet Extrusion Machine Panel And Sheet Extrusion Machine,Pvc Sheet Extruder,Plastic Sheet Extrusion Equipment,Hdpe Sheet Extruder Machine Hitech Intelligent Machinery(Ningbo)Co., Ltd. , https://www.machinehitech.com
Many users do not understand why the Guangdong lifting platform has a low pressure during use, resulting in reduced work efficiency. This cause is generally caused by the internal leakage of the system. Below is a small series of Guangdong Haoxiang Machinery for everyone to analyze in detail what are the reasons for the low pressure on the lifting platform? 1. The hydraulic motor of the hydraulic lifting platform is worn out or the hydraulic cylinder seal is damaged, so that the hydraulic system pressure of the lifting platform is lowered, and the original pressure is not maintained. If there are multiple actuators in the lifting platform system, when the pressure of one of the actuators is abnormal, the other pressures are performed normally, which indicates that the actuator is problematic. Second, the main valve core of the lifting platform overflow valve and the mating surface wear, is the secondary control pressure drop of the relief valve, which will cause the pressure of the hydraulic system of the lifting platform to drop. 3. There is a gap between the lifting platform and the valve and the raft in the hydraulic system, which may cause the pressure of the lifting platform to drop. Fourth, the hydraulic pump wear of the Guangdong lifting platform has produced a gap, and the pressure can not be raised, and the output flow of the raft is reduced. Guangdong Haoxiang Machinery Manufacturing Co., Ltd. is committed to becoming a domestic high-quality hydraulic logistics equipment supplier. If you need hydraulic elevators, boarding bridges, lifting stages, aerial work platforms and other logistics equipment, pay attention to Guangdong Haoxiang Machinery official website, more details waiting you.