The rainy days are particularly splendid recently, and it is normal for commercial vehicles to have leaks caused by heavy rainfall. The majority of leaks in commercial vehicles are in the trunk and door switch areas. The majority of the reasons for this are due to aging or breaking of the waterproof strips, causing adverse effects, and from where the rain will slowly If the leakage is caused by leaking, it can be prevented by the use of commercial vehicle-specific re-adhesion agents to re-bond them. There will be two types of leaks from the bottom up or from the top to the bottom. When the rainwater leaks from the bottom up, it may be due to the deviation of the plastic bolt on the floor of the commercial vehicle. Because there are several holes in the bottom of the floor, and the plastic plug is embedded from the top position, when the position is deviated, the ground and the commercial vehicle will become a box of connected conditions, if the rain is from the bottom When you seep up, the floor is soaked with rain, so check this position immediately. When the weather strip of a commercial vehicle has deteriorated, it will also leak out. This time, it needs to be replaced immediately. Leakage occurred around the door, so you should check if there is any peeling or if there is a distortion around the waterproof strip. If the deformation becomes more serious, replace it. When using adhesive seals for commercial vehicles, do not pull the Feng Shui strip excessively to avoid injury. If a small part of it has become loose, it is more difficult to bond. It can be peeled off and rebonded. If it is a small part of the waterproof strip of a commercial vehicle, the curved position is tight, and the rainwater leaks directly from these slits. After peeling off the waterproof strip, apply a protective agent for rubber. Restore its elasticity.
Pillar free C-frame fuselage, barrier free for long line and towing products.
The horizontal type can seat in front and back, up and down the lifting table, and the use of molds is extensive.
Clamping system: Faster response, steable and high rigidity. C-series Injection Machine, Filter Injection Molding Machine,Molding Machine Oil Filter,Plastic Injection Machine Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.