Brass material is called special brass if it is made up of more than two elements.Copper alloys, such as lead, tin, manganese, nickel, iron and silicon.Brass has strong wear resistance.Special brass is also called special brass. It has high strength, hardness and chemical corrosion resistance.The mechanical properties of machining are also outstanding.Seamless copper tube made of brass, soft and wear-resistant.Brass seamless tube can be used in heat exchanger and condenser, low temperature pipeline, submarine transport pipe.Manufacture sheet, strip, bar, pipe, casting parts, etc.Copper content in 62% ~ 68%, strong plastic, manufacturing pressure - resistant equipment.
Cnc Machining Brass Parts is the use of cnc machining out, including: drilling, boring, cutting, turning, screw. Product material be used brass.In the high-speed machining out of the workpiece has a good finish. cnc machining products surface treatment has electroplating, sand blasting, laser engraving LOGO,brushing, rolling flower, according to the special requirements of the drawings.We have a special inspection department to carry out inspection, to ensure that each size of products meet the requirements of the drawings,CNC Machining Parts is the most common in mechanical processing, low density, not easy deformation, high precision products. So it is widely used in various industries.
Cnc Machining Brass Parts Cnc Machining Brass Parts,Brass Fittings,Brass Machined Components,Brass Components YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com
Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.
MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production
Flow chart of metal injection molding
Application of MIM
Products Range:
Â
Material
Â
Typical Values
Â
Â
Designation Code
Density g/cm3
Tensile Properties
Young's modulus, Gpa
Un-notched Charpy Impact Energy,J
Hardness,Rockwell
Â
Â
UTS. Mpa
Y.S. (0.2%), Mpa
Elongation (in 25.4mm) %
Â
Â
Macro (apparent)
 Micro (converted)
MIM-Fe2Ni
7.8
280
115
25
Â
Â
55 HRB
50HRCÂ Â Â Â
MIM-Fe8Ni
7.8
450
Â
12
Â
Â
84HRB
50HRCÂ Â Â Â
MIM-2200 (as sintered)
7.8
290
125
40.0
190
135
45 HRB
Â
MIM-2700 (as sintered)
7.8
415
255
26.0
190
175
69 HRB
Â
MIM-4605 (as sintered)
7.8
440
205
15.0
200
70
62 HRB
Â
MIM-4605 (Q&T)
7.8
1655
1480
2.0
205
55
48 HRC
55 HRC
MIM-304L
7.8
500
Â
70
Â
Â
60 HRB
Â
MIM-316L (as sintered)
7.85
520
175
50.0
190
190
67 HRB
Â
MIM-410
7.7
900
Â
7
Â
Â
Â
40 HRC
MIM-420 (heat treated)
7.7
1380
1200
12
190
40
Â
45-60HRC
MIM-430L (as sintered)
7.8
410
240
25.0
210
150
65 HRB
Â
MIM-440C
7.8
700
590
15
Â
Â
Â
45-60HRC
MIM-17-4PH (as sintered)
7.8
900
730
6.0
190
140
27 HRC
Â
MIM-17-4PH (heat treated)
7.8
1190
1090
6.0
190
140
Technics: MIM
Quoted Condition: 2D / 3D Drawing / Sample
Package: Carton, Plastic Bag, Export Package
OEM/ODM: Welcome
Production Time: 15-30 Days
Weight: 24.8g
Size: 102.5*10.4 mm
Trademark: drome
Transport Package: Carton
Specification: 290*190
Origin: Suzhou, China
MIM(Metal powder Injection Molding) isthe5th generation of metal forming technology. Over 40 years of development, people gradually find more applications for MIM process especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years.