LINA Extrusion Pelletizer
Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives.
LINA Water Strand Pelletizing Machine
LINA's water strand granulating machine adopts twin-screw extruder barrel and modular screw design. According to the processed materials and formula requirements, configurations such as length and diameter ratio, barrel structure, screw arrangement, filter change structure, number and location of exhaust, feeding methods, electrical control can be optimized. LINA rubber and plastic water strand granulator is suitable for kinds of renewable materials, outlet materials, glass fiber, nylon, ABS, high concentrated masterbatch and so on. LINA water pull pelletizer line is currently using the latest technology, its cooling effect is excellent, its pelletizing system is independent, and the outcome particles are even and beautiful.
Advantage of LINA Pelletizing Line
1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.
2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.
3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.
4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.
5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.
6. The hoist adopts automatic return technology to ensure the working efficiency.
7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.
Specifications of LINA Extrusion Granulating Line
Name
Mode
Capacity of Kneader
Screw length to diameter ratio
Screw diameter
Dimension
LINA Extrusion Pelletizing Line
LN-10/70
10L
12:01
70mm
2200*1000*1150
LN-10/75
10L
12:01
75mm
2650*1100*1250
LN-35/100
35L
12:01
100mm
3800*1090*1690
LN-55/120
55L
12:01
120mm
3800*1090*1690
LN-75/135
75L
12:01
135mm
3850*2350*3280
LN-110/150
110L
12:01
150mm
5100*2000*1500
LN-110/165
110L
12:01
165mm
5100*2000*1500
Water Strand Extrusion Pelletizer water cooling strand extruder pelletizer, single screw exturder pelletizing line, single screw pelletizing line, plastic water strand extrusion pelletizer, double screw extruder with water cooling strand LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com
Up to now, Longxiang has exported about 2400 sets of moulds to 38 countries. The moulds we made include automotive parts (dashboards, inner decorating accessories, etc. ), electrical appliances (washing machine, air conditioner, refrigerator, television, etc. ), IT industry products (cell phones, computer, etc. ), householder products (micro-wave oven, juicer, etc. ), office accessories (telephone, printer, etc. ) as well as other various of products. We look forward to participating at the success of your next project.
Â
Â
CNC machines: Twenty sets from 500-2000 mm;
Production capacity: 50 sets of moulds per month;
Molding trial machines size: 80-2000 tons
The resin we are familiar with: ABS, PA, PMMA, PC, POM, ABS+PC, TPE, TPR, ASA, PA+GF, PP, PVC, PE etc.
Longxiang's markets:
Asia: India, Iran, Bengal;
Africa: Egypt
Europe: UK, France, Germany, Italy, Portugal; Spain; Belgium; Finland; Netherlands; Russia; Denmark;
North America: USA; Canada;
South America: Brazil,
Oceania: Australia;
Â
2. Negotiation: Material, cavity, price, delivery time, payment term, etc.
3. Order: According your own design or choice our design
4. DFMEA: Deign failure mold & Effect analysis to reduce risk
5. Mold design: 2D/3D drawing
6. Cutting Tooling Notice: After customer approve the mould design will start making mould
7. Weekly Report: We will update the mold schedule every week
8. Sample Confirm: Send you sample for conform it, if not satisfied by customer. We modify mould.
9. Delivery Mold: Delivery mould after customer approve sample and arrange shipment
FAQ
1. Q: Which kind of product can you do?
    A: Plastic injection molding and mass production for plastic parts.
2. Q: Which kind information need for quotation?
     A: 1) Sample photo with size or 2D/3D design
          2) Product material
          3) The quantity
          4) Runner type, cold or hot
          5) Mould steel type, P20, 718, 2738, H13, S136, 2316, an so on.
3. Q: I have no 3D drawing, how should I start the new project?
     A: You can supply us a sample or tell me your idea,we will help to finish the 3D drawing design.
4. Q: How long will be the injection mold finished?
    A: Usually it will take about one month to finish the mold.
5. Q: How about the samples?
    A: After mold finished, We will make some samples for you to check as soon as we finish the mold and then deliver the samples for you to check.
6. Q: How about the mould modify?
    A: You can tell us your comment about the samples after you receive them.If there is any dimension different from the drawing,we will modify the mold for free in our side and then make the new samples.
7. Q: How about the proprietary rights of the plastic injection mold?
     A: Customer paid the mould so it all belong to Customer.
8. Q: How about the surface treatment?
   A: Metallization (chrome, gold, silver) / Painting (hand, screen, automated) /Vacuum plating / Lithography / Custom texturing/ Hydrographics
Â
1. Manufacturing and exporting experience for over 20 years. ISO 9001 approved
2. Products are supplied to over 50 countries.
3. One-stop service for aluminum profiles, plastic parts, rubber parts, and moulds. Save time and save money for you.
4. In-house mold design and building capabilities.
5. No reclaimed material used to ensure high quality.                                         Â
6. Keep secret to your idea and your design.
7. 24 hours (two shifts) / 6 days for production.
8. Professional design team, mold maker engineer. OEM/ODM service.
9. Professional QC and R&D teams to assure high quality.
10. Professional sales team. Good English capabilities and communication skills.
11. No MOQ.
12. Prompt delivery. For prototype: 3-7 days. Production orders can be arranged specially to meet customer's urgent demands.
13. Geographical advantages: within 30 minutes to airport or sea port, near to Hongkong.
You can know more about us from www.plas-mold.com as well as www. Longxiang-Ltd. COM
Looking forward to having a good start for our reliable cooperation!
LONGXIANG MOLD SHOW
LONGXIANG PLASTIC PART SHOW
LONGXIANG FACTORY SHOW
LONGXIANG TEAM SHOW
Mold Specificaiton
Item name
 sell plastic injection mould for auto parts
The company's strength
 1) Efficient team
2) Delivery on time
3)Â Excellent equipment
4)Â High quality and competitive price
Â
Core and cavity material
 718, 718H, S136, NAK80, P20, SKD61, etc
Â
Plastic material
 ABS, PE,PP, PET,PMMA, PC, etc
Â
Main processing equipment
 CNC, wire cutting, Grinding machine, Lathe, Drill Press, EDM center
Â
Practicable software
 Pro/engineer, Solidworks, UG, AUTO cad
Â
Business Scope
 1) Industrial design
2)Â Mould making
3)Â Parts machining
4)Â Reverse engineering
5)Â Injection molding
6)Â CNC prototype manufacturing
7)Â Kitchenware design and software
Â
Â
Primary Competitive
advantages
Â
 1) Quickly respone and complete understanding
2) The most competitive and reasonable price
3) Short delivery time and prompt delivery
4) Well and High Quality Control
5) Customer's Designs and Logos are welcome
6)Â In a variety of designs
7) Small order accepted
8)Â OEM acceptable
Model NO.: Longxiang-J050
Runner: Hot Runner
Design Software: Pro-E
Installation: Fixed
Certification: CE, ISO
Standard: HASCO
Customized: Customized
Place of Origin: Guandong China(Mainland)
Part Material: PE, PVC ABS, PC, PP, POM, PA6( PA66, GF Filled), P
Product: Household Appliance
Mould Steel: P20, H13, 718h, Nak80, S136, 2311, 2344, 8407
Mould Runner: Cold or Yudo Runner
Design & Program Soft Wares: CAD/Cam/Cae, Ug, Proe, Powemill, Solid Works etc
Mould Life: 0.3 Million to 2 Million Shots
Lead Time: 25-35 Working Days
Mould Base: Lkm, Hasco, Dme, etc.
Trademark: Longxiang
Transport Package: Wooden Case or as Per Client Requirment
Specification: STEEL
Origin: China
HS Code: 8480710
 Longxiang Group Limited was established in Dongguan city in 1998. After over 15 years of hard work, Longxiang has grown to be one of the highest reputable mould maker in China with 120 employees and 5000 sq. Meter working shop.
FERNO is one of the world's leading medical technology companies with the most broadly based range of products in patient-handling and emergency medical equipment and mortuary equipment. LONGXIANG start to cooperate with FERNO since 2005, make mold and plastic parts for FERNO USA, FERNO Slovakia, Ferno Australia. Longxiang have offered over 200 plastic injection molds, include pusher, cross handle, handle mount, handle roller, legs, scuff strip, clip, cover hinge, control paddle, end cap, battery tray, battery hood, battery cover, linkage fork, and so on.All parts are necessary for medical equipment.
Our main features:Tooling Developing Procedure:
1. Quotation: We need your require clearly
Why Choose Longxiang?