The correct use of push-pull gauges is currently used in many industries. However, many users have purchased push-pull gauges but do not know how to use them properly. Then, today, Henggang's push-pull gauges are compiled for the majority of users. An information on the correct use of push-pull gauges. Hope can help everyone. Before using a push-pull force meter, first check whether the battery voltage is normal. If the voltage is under voltage, charge it in time. Otherwise, the measurement will show a deviation. Push Rally Picture Push Rally Picture Push Rally Picture You may still be looking for: digital dynamometer , digital torque tester , electronic tension meter , digital push force meter , digital torque tester , torque wrench tester , electronic dynamometer Hydraulic Rock Breaker,Excavator Breaker Hammer,Rock Hammer Hydraulic Breaker,Professional Production Line Breaker MA AN SHAN GOLDEN STAR MACHINERY CO., LTD , https://www.gsdmachinery.com
When carrying out destructive debugging, protective masks and gloves should be worn to prevent spatters generated during the debugging process;
Do not use a damaged or bent deformed debug head, otherwise the adjusted items may fall on the feet and hurt the body.
Push-pull force gauges are often used to measure loads that exceed the maximum commissioning load, otherwise the elasticity of the load detection mechanism will gradually deteriorate, resulting in the detected load value being unable to achieve the required accuracy level.
Estimating the measurement size, selecting a suitable range of push-pull force meter, and measuring the out-of-range distance will cause the accuracy of the push-pull-force gauge sensor to deteriorate when the measured value is less than 3% of the pull-pull measuring range.
When not in use for a long period of time, you should periodically charge the force gauge.
At the same time, when the weather is humid in the summer, it is necessary to pay attention to the environment of the instrument and avoid corrosion of the instrument.
Do not push or pull the load test in any direction other than the push-pull force meter. When the commissioning rod is not connected to any debug head, do not apply the measured load directly to the end of the adjustment rod. If the user needs to do a special push-pull force meter Debugging joints must be able to withstand the maximum commissioning load. Otherwise, the debugging joints can easily be broken during commissioning and cause accidents. 
