Nearly three years after its production, China's first set of demonstration equipment for transporting ash-consolidated fluidized-bed pulverized coal pressure gasification industry exceeded its continuous operating time by more than 100 days, setting a record of 112 days of continuous and stable operation. According to the general manager of the company, Cao Yongkun, the coal-based synthetic oil produced by this device has reached the national IV standard for automotive fuel, and all consumption indicators have reached the design level. The ash fusion fluidized bed pulverized coal pressurized gasification technology is a patented technology invented by the Shanxi Coal Chemical Institute of the Chinese Academy of Sciences. The raw material is the inferior “three high†anthracite with high sulfur, high ash and high ash melting point. In June 2009, the domestic first 100,000-ton/year synthetic oil demonstration project built on this technology opened up the whole process and produced a qualified No. 93 gasoline. It is reported that Tianxi is the only company in the country that uses the ash fusion fluidized bed pulverized coal pressurized gasification technology to realize the commercialization and scale of the technology and the continuous and smooth operation of the equipment. Zhou Guang Chief Engineer Zhou Guang told reporters that in the nearly three years after putting into production, in order to extend the continuous and stable operation time of the device, they carried out more than 200 transformations, and continuously improved and improved the production system. In order to realize energy recycling and reduce consumption, they have built "three wastes" boilers for burning waste slag, waste gas, and waste ash. They effectively treat and use gas slag and waste gas. Large compressor units such as raw gas compressors use centrifugal compressors to reduce them. The number of equipment, to improve the overall efficiency of energy use; make full use of gas generation, conversion, methanol synthesis system waste heat and reaction heat by-product steam, the synthesis, methanol-made gasoline (MTG) and other workshops as the dryer gas recovery heat source. In addition, they also use the Claus sulfur recovery unit to recycle the hydrogen sulfide gas vented from the purification plant to produce high-quality sulfur. After years of exploration and practice, Jinmei Coal Group has accumulated rich experience in the production of coal-to-petroleum oil, and the operating quality and efficiency of the production system have been significantly improved: the operation of the ash fusion gasifier is stable, and 7 furnaces are opened for 5 to 2; methanol The oil production device can be safely and stably operated for a long period of time. The production load can reach more than 95% of the design capacity. The consumption indicators of the device can reach the design level; the coal-based synthetic oil produced can reach the National IV Standard for Highly Clean Vehicle Fuel; and it will eventually be continuous. The operating record was increased from 70 to 80 days to 112 days. Jinhua Group Chairman Wu Huatai told the reporter: During the “12th Five-Year Plan†period, Jincheng Coal Group will build another million-ton coal-oil-making park on the existing basis. By 2015, when the new park is completed and put into operation, it can use 750,000 tons of “three high†inferior coal annually to produce 1 million tons of clean fuel and 150,000 tons of liquefied petroleum gas. Robot And Conveyor For Plastic Parts
Advanced technology and optimal design in harmony.
8.4 inch touch screen display in English,usar-friendly interface.
The use of multi CPU control, the high system response speed, high control accurancy, positioning accurancy 0.01mm.
We offer five servo motor robot controller, three servo motor robot contorller, two servo motor controller, and single motor robot controller.
The machine parameters, mold number procedures can be imported and exported through the U disk in different machines.
U disk upgarde, customer can upgrade trhe latest system, continue to get stable support.
HIgh speed of I/O transmission technology, so that the robot speed is faster, can shorten the cycle time of more than 10 %.
The control precision is greatly improved, the control precision of all the time is up to 0.01 seconds. which can be more accurate with the mold out of product, shorten the time to remove the robot, improve the efficiency of the injection molding machine.
Robot And Conveyor For Plastic Parts,Conveyor For Plastic Parts,Conveyor Spare Parts Use In Plastic,Plastic Conveyor Products Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyong-machinery.com