High Temperature Printing And Dyeing Pump The main flow components of the high temperature printing and dyeing pump are the suction chamber, the impeller and the pressurized water chamber. The water suction chamber is located in front of the water inlet of the impeller, and plays the role of guiding the liquid to the impeller; the water pressure chamber mainly has three forms: a spiral pressure water chamber (volute type), a guide vane and a space guide vane; the impeller is the most important part of the pump. The important working element is the heart of the flow passage part, and the impeller consists of a cover plate and a middle blade. Before the high-temperature printing and dyeing pump works, first fill the pump with liquid, then start the high-temperature printing and dyeing pump, the impeller rotates rapidly, and the blades of the impeller drive the liquid to rotate. , in this process, the liquid in the impeller flows around the blades, and the liquid acts a lift force on the blades during the flow movement, and in turn, the blades act on the liquid with a force equal to and opposite to the lift force, and this force acts on the liquid. Do work, so that the liquid gets energy and flows out of the impeller, at this time, the kinetic energy and pressure energy of the liquid increase. High Temperature Printing And Dyeing Pump,High Temp Pump,High Temperature Pump,Print And Dye Pump Jiangsu Qiantu Trading Co., Ltd. , https://www.qtprimingpump.com
The cement kiln is mainly used for calcining cement clinker, and it is divided into two types: cement kiln and wet kiln. Metallurgical chemical kiln is mainly used for magnetization roasting of iron ore in iron and steel industry in metallurgical industry; oxidizing roasting of chromium and ilmenite; roasting of high-metallurgical ore and aluminum plant roasting clinker and refractory material in refractory plant; roasting of chrome ore and chrome in chemical plant Mineral powder and other minerals