Model NO.: FTech- ISO13934(A)
Testing Range : 0~30kn 
Tensile Speed: 0.001~500mm/Min 
Trademark: TESTECH
Transport Package: Plywood Case
Specification:   1100*800*2200mm
Origin: China
HS Code: 90248000
  
Description Of Goods:

Model:  FTech- ISO13934(A)
 DR028T  Comprehensive Electronic Strength Tester for Geotextile
1. The scope for high-load test floor two-column series.
2. Capacity up to 50kN.
3. Robust heavy-duty chassis to meet the high-load applications.
4. Widely used in high-strength metals and alloys, advanced composites, aerospace and automotive structures, bolts, fasteners and steel plates.

Applicable Range
Used for the strength performance test of tensile,bursting,shearing,peeling,compressure, bending, tearing, creeping, elasticity, joint seem, ect. For all kinds of materials.

Instrument characteristics
Rack design life of more than 30 years
1. High-strength materials, solid rigid frame
Pre-loaded bearings and precision ball screw, thick beams and base beams, and lowerdegree of belt tension, can minimize the energy stored during the test, resulting in bettertest performance and to obtain more accurate modulus and strain values.

2. Excellent precision on the rail and bending
In the implementation of the axial test, only with a stable, precise rigid rail system to getaccurate results of stress and strain to ensure that the sample under load by the lateral force of the impact to a minimum.

3. greater imports of advanced servo motor and drive system, higher reliability.
Beginning of the test motor to power the acceleration rate is higher, the operation cycle ofthe test cycle faster, dual-belt system to keep pace with ball screw movement, andorientation and help to eliminate the beam tilt in the system and precise positioning.

The third generation of embedded systems based on digital signal processing (DSP) control technology
1. high-speed, low vibration Japan imported servo drives, high-resolution digital closed-loop controller.
2. modular design, multi-channel data acquisition and analog output module, open data management, enabling the load, deformation, displacement, speed and othermeasurement and control.
3. high-precision load sensor uses imported high-precision 24 bits A / D, samplingfrequency of 2000Hz, maximum resolution power of the whole 1 / 1, 000,000.
4. with a mobile control box, easy to move or be rack-mounted, display machine working status, and provide the necessary test control process controls, positioning precision positioning to move the button and thumb wheel that can efficiently move traffic , fine-tuning can be accurate to 0.1 mm.

Powerful, easy to use control software
(Software copyright 2010SR046285)
1. the use of component-based software system architecture, testing process free combination, meet all the conventional test method, test methods and increasing thestandard library (GB / T, FZ / T, ISO, ASTM, BS, etc.).

2. guide the tester to complete the relevant standard test, the user can not reset the case of existing hardware and software system updates, users can use online support, easymaintenance of equipment, never worry about.

3. user-friendly operating software with intuitive operation, the button operation and easy to understand the environment greatly simplifies the test selection screen, start-up and real-time monitoring. The display is easy to understand and highly flexible, interactive datagraphics rendering, enhanced test analysis.


4. reports and charts presentation class, or to meet your special needs and custom data-sharing format. The format will be easy to create effective output for the test results of test reports and other visual formats, such as Excel, Word, HTML, etc.

A full set of optional clamps, accessories and extensometer

Technical parameters

 Model FTech- ISO13934(A)
 Working pattern  mircocomputer control, servo driven, mainframe and computer double controlled supportable
 Sampling frequency   2000 times/s
 Testing range    0~30KN 
 Testing accuracy   ≤±0.5%(0.5 level) 
 Speed control system  Japan imported servo
 Tensile speed  0.001~500mm/min 
 Effective stroke  1000mm 
 Elongation resolution  0.001mm 
 Gantry width  500mm 
 Optional clamping means  Manual pneumatic hydraulic
 Clamping distanceregulation accuracy  0.5mm 
 Optional distraction apparatus  Optional
 Power source  AC380V  50HZ  2.5KW 
 External dimension   1100×800×2200mm 
 Weight  200kg 

Note: Special machine-shaped widening acceptable height custom
Comprehensive Electronic Strength Testing Machine for Geotextile
 

Spandex Warping Machine

Spandex Warping Machine

Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.

A-ZEN spandex warping machine AZE318 with vertical creel is driven by 5 sets high performance servo motors and adopted with advanced precisive laser to measure distance so that spandex warping is more stable, well equipped with and easier to operate. It is suitable for warping all kinds of spandex, especially for requirement of knitting high quality elastic textiles.

Technical Data:

Warp Line Speed: 100-600m/min;

Beam Size: Φ21"*21";

Warping ends: According to customers` demand;

Pre-drafting: 0-200%; Final Draft: 15-100%;

Brake time less than 0.6 s, the deviation of stop synchronization is less than 3%;

Creel Capacity: 616, 700, 728, 784, 792, 896, etc.

Servo Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft Roller 4.6KW, Creel: 2*6.9KW;

Main Motor: 10KW AC frequency conversion control;

Control Mode: Computerized real-time control, and user-friendly operation interface.

Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine

CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.tricotmachinery.com

Posted on