Pitch Cleaner Spray is the latest industrial -grade powerful cleaner, which is used for family, cars, ships and RVs. It can strongly remove oil, ground dirt, pavement dirt caused by cars, and the most difficult oils around the house. Suitable for any cleaning objects, and can be strongly removed.
Instructions:
Precautions
Pitch Oil Cleaner,Pitch Cleaner Spray,Pitch Spot Cleaner,Car Pitch Cleaner Guangzhou Lidi Automobile Supplies Co., Ltd. , https://www.lambosscn.com
According to reports, the construction of the 60,000-ton nylon chip reshaping and expansion device for chemical fiber companies started from November 5, 2009, and the installation of the equipment system began on May 27 this year, creating a “short-lived†miracle in the history of the installation and expansion of the Yueyang area. The project is operated by the joint-stock cooperation mechanism, and the introduction of foreign private capital shares, total investment 47 million yuan, an investment of 19 million yuan less than the original planned budget. It is expected that after the new polymerization plant is started, the capacity of the nylon fiber section of the chemical fiber company will reach 110,000 tons, and the production capacity will leap to the second place in the country.
1. Clean the body first;
2. It must be used in a good ventilation place and shake the liquid in the bottle before use. Confirm that you can use it after the spray direction;
3. Spray this product directly to asphalt stains;
4. Stop for a moment, then wipe the stains with a clean soft cloth
2. If you accidentally enter the entrance, you should immediately cause vomiting and seek medical treatment;
3. Jet type, please keep the gas fog standing upright and the horizontal angle shall not be less than 45 °;
4. Please store it below 40 °, stay away from the heat source and bright fire, and it is strictly forbidden to expose the exposure, impact, puncture or incineration of the jar;
5. Do not let children come into contact;
At 9:45 on November 22nd, Baling Petrochemical Chemical Fibers Co., Ltd. built a new 60,000-ton nylon chip splicing unit to produce qualified products, marking the successful launch of a polyamide chip polymerization device with advanced domestic standards.