Tungsten carbide roller has characteristics of good wear resistance, high temperature red hardness, thermal fatigue resistance and thermal conductivity and high strength , have been widely used in high-speed wire rod, bar, rebar, seamless steel tubes, etc. Domestic production of tungsten carbide roller materials mostly WC- Co, WC- Co- Ni- Cr two series, and the content of Co, Co- Ni - Cr is in the range of 6wt% ~ 30wt%. From the use of perspective, tungsten carbide rollers has good mechanical properties, its flexural strength up to 2200 MPa or more, shock toughness up (4 ~ 6) × 10^6 J/ m^2, Rockwell hardness (HRA) is up to 78 to 90, widely in the high-speed wire rod rolling process, which is much higher than single-slot chilled cast steel or high speed steel rolls.Tungsten carbide is made of Tungsten Carbide Powder and binder phase (such as drilling, nickel, etc.), and then pressing and sintering, regardless of the conditions under cold rolled or hot rolled has excellent wear resistance, tungsten carbide rollers has been widely used in pre-finishing mill and finishing of high-speed wire rod currently. On the performance of tungsten carbide roller in hot-rolling wire rod , the material must meet the following requirements:
Tungsten carbide roller material design
Tungsten carbide roller category
Tungsten carbide roller production process control Carbide Roller,Carbide Ring,Mill of Rolling Line,Steel Wire Rod,Mill Rolling Finish Stand,Mill Roller Groove Type Luoyang Golden Egret Geotools Co., Ltd , https://www.xtccarbide.com
The details about our tube 110/90-16 :
size
weight(g)
tensile streng th
elongation
brand
Qty'40HQ
width
110/90-16
660
8-13MPa
440---550%
OEM
4000
115
Our factory is one of the biggest manufacturers of motorcycle tires and tubes in China.Our products are well received at home and abroad, Mainly exported to more than 60 countries and regions in Asia, south America,Europ,Middle East, South East Asia, Africa.
Why Choose Us?
1. We are one of the biggest specialized manufacturer of motorcycle tires, and inner tube ,wheelbarrow tires and inner tube,as well as other rubber product.
2. We can assure you of both the price and quality are the best. As a manufacturer, having our own factory, build in 2011.We have more than 4 years experience in this field.
3. Prompt Delivery time: We are located in the west coast of Qingdao, there is only 120km to Qingdao Port, so we are with superior geographical and convenient transportation .one day we can produce 7000 pieces tires and 10000 PCS inner tube.
4. The quality is warranty. The company has throughISO9001-2008International Quality System certificate and EMARK,INMETRO,CIQ ,SONCAP ,SGS certificate. So the quality is warranty.
5. Moreover, we can satisfy your large and urgent order There are more than 200 workers and including 40 technicians, covering the land of 21000 sq meters. We can supply the product as your design.
6. We are a company with strong strength, we not only have the Alibaba platform being a golden supplier, but also have Made-in-China .
What we can do to control the products quality strictly:
1: Materials which data can't meet our standard will never be feeded into our warehouse.
2: After valcanization, motorcycle inner tubes with holes will be chosed out after being filled with air for 24 hours
3: The workers will get rewards for choosing out the bad motorcycle tubes when being packed.
4: New and advanced equipments can keep high quality .
We test the tube quality every days. Quality test result as follows:
1. Tube Tensile strength: 8MPa, 10MPa ,13MPa.
2. Rubber percentage: 18%, 25% ,37%.
3. Tube elongation: 440 % ,470%,510%.
Call us at once! my mobil is 008615554265365
You will feel easy to buy good quality goods.
Each new order is our driving force!
Each old client is our great treasure!
1. Sufficient anti-fracture strength;
2. Good abrasion resistance;
3. The smooth surface finish;
4. Excellent corrosion resistance, thermal fatigue, thermal cracking performance.
Tungsten carbide roller rings can working in bad conditions , small profile rolling (especially rebar rolling) process conditions is harsher than the high-speed wire rod, and therefore corresponds to the profile rolling ,tungsten carbide rollers recommend using high binder phase carbide.
Pre-finishing all vehicles roller should ensure its high toughness, strength, rigidity and thermal conductivity, followed before considering its wear resistance. When designing each vehicles roller, pre-finishing materials should choose carbide grades of Co, Co- Ni- Cr binder content is high (greater than or equal to 25wt%) , requiring an average WC grain size of coarse (5μm ~ 6μm), to obtain a higher shock toughness, proper strength and hardness. For the finishing of the roller movements, particularly the last two rollers of the finish rolling, which suffered load is small, and high relative velocity of the material to be pressed (80 m / min ~ 120 m / min). In this case, the wear resistance of the roller to be the most important requirements, and must ensure the strength , timpact toughness and hardness of a reasonable match, so the binder of Co / Ni content ratio and the average grain WC control of particle size and other factors must have greater control in front of different pre-finishing rolling roll.
According to the structure of tungsten carbide rollers, it can be divided into solid tungsten carbide roller and composite tungsten carbide roller. Solid tungsten carbide rollers have been widely used in pre-finishing and finishing stands high speed wire rod mill (including fixed reducing the rack, pinch roller rack). Composite tungsten carbide roller is made of cemented carbide and other materials, and it can be divided into tungsten carbide composite roll rings and solid tungsten carbide composite roller. Tungsten carbide composite roll rings mounted on the roller shaft; solid tungsten carbide composite roller will be directly cast in the roll axis to form a whole, a large load is applied to the rolling mill.
Tungsten carbide rollers produced by powder metallurgy method, the key to its process control is the chemical composition of the material and the mixture was prepared, pressed molding, sintering and deep processing and other preparation process parameters.
1. Preparation of starting material (WC focus quality): As the WC raw material and quality control of the use of different levels of quality may fluctuate, resulting in adverse effects on microstructure.
2. Preparation of the mixture: Mixture preparation is the key to the production process of the roller, the roller of failure modes - trachoma, mainly generated by this procedure.
3. Pressing: roller pressing is an important process of the roller mill.
4. Sintering: roller sintering is to determine the final quality of the roller production processes, use of advanced low-pressure sintering technology, HIP sintering technology can greatly improve the performance of roller.
5. Deep processing: deep processing rollers have a greater impact on the quality and accuracy of the roller surface.