Model NO.: MD-C
HS Code: 9031809090
Model NO.: MD-C
HS Code: 9031809090
MD-C Magnet Needle Detector

Mainly Features:

1. Power Supply: AC 220V 10% 50 Hz;

2. It is able to check the well-packed product with aluminum foil casing;

3. It has metal orientation ability which can nearly make certain the metal's orientation;

4. Relay Output: Solid Relay Long-time Open Output, the joint will close if the metal has been detected;

5. Indicator Light: Green light shows that the power supply has been switched on, the red light gives an alarm;

6. Detect Speed: 0.5 m/s;

7. Working Style: Working around the clock;

8. Working Environment Temperature: -10° C~45° C;

9. Sensitivity: Free Adjustment
 
Detect mothed Magnetic induction
Anti-interference Digital Anti-interference
Detect width 600mm
Detect height 100mm
Sensitivity Fe>=0.8mm
Alarm method Buzzer,lamp,return,stop
Count function Good,toral,alarm


For more detail info, please feel free to visit our website or inquire us at any of your convenience.

www.magnetequip.com
  MD-C Magnet Needle Detector

Mainly Features:

1. Power Supply: AC 220V 10% 50 Hz;

2. It is able to check the well-packed product with aluminum foil casing;

3. It has metal orientation ability which can nearly make certain the metal's orientation;

4. Relay Output: Solid Relay Long-time Open Output, the joint will close if the metal has been detected;

5. Indicator Light: Green light shows that the power supply has been switched on, the red light gives an alarm;

6. Detect Speed: 0.5 m/s;

7. Working Style: Working around the clock;

8. Working Environment Temperature: -10° C~45° C;

9. Sensitivity: Free Adjustment
 
Detect mothed Magnetic induction
Anti-interference Digital Anti-interference
Detect width 600mm
Detect height 100mm
Sensitivity Fe>=0.8mm
Alarm method Buzzer,lamp,return,stop
Count function Good,toral,alarm


For more detail info, please feel free to visit our website or inquire us at any of your convenience.

www.magnetequip.com
 

Die Casting Products

At present, the die casting industry mainly die casts aluminum alloy, zinc alloy and magnesium alloy, as well as a small amount of copper alloy and other metal die casting parts. Since die-casting uses molds to form, a relatively long mold manufacturing cycle is required in the early stage, and the production efficiency is high after the mold is manufactured. Therefore, for die casting products, it is especially suitable for mass production, with relatively low cost and high efficiency. However, since the die-casting material is a metal material, it is more difficult to demould compared with the plastic material, so a relatively large demolding slope needs to be used, and the shrinkage of the metal itself causes the precision not to be very high. For positions that require precision assembly, subsequent secondary CNC machining is usually required to achieve the accuracy requirements. Die casting parts can be seen everywhere in industries such as automobiles, lighting, machinery, communications, electronics, and home appliances. Some die-casting products as shown below:

die casting

Die Casting Products,Die Cating Part,General Die Casging,Zinc Alloy Die Casting Parts,Zinc Alloy Die Casting,Metal Die Casting Products

Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com

Posted on