Electrical failure
Ammonia
cracker of XRAQ(FC)series takes liquid ammonia as the source material ,and when heated, decomposes
into the mixed gas of 75% H2 and25% N2 under the action of catalyst.
Some of the usages of Ammonia cracker of XRAQ
series:
1)
It is used as the protective gas in the furnace which produces and processes
the black metal, on-ferrous metal, metal plate, strip, wire material tubing and
standard parts of machinery.
2)
It is used as the shielding gas of tinning bath in the float glass production.
3)
It is applied to the sintering circuit of cemented carbide and powder
metallurgy.
4)
It is applied to the sintering of high-temperature refractory (such as silicon
carbide, silicon nitride)
5)
It is used as the reducing gas in chemical industry.
6)
It is used for deoxidization by hydrogenation in the nitrogen purification.
The Advancement of
XRAQ(FC) series:
1)Low cost:Device of XRAQ(FC)series is an easy way to get the mixed gas of N2 and H2.Compared with
hydrogen generation device by water electrolysis, it possesses the advantage of
low investment, simple structure and easy operation.
2)Reliable Performance: Temperature is
controlled by automatic temperature controller; flow rate is regulated by
valves; no need of specially trained operators; stable gas can be get
consecutively.
3) High quality catalyst, stainless steel that
is heat and corrosion resistant, nickel chrome electric heating element are
selected to use, which prolongs the service life.
4) Strong technological team and high-quality
after-sale service. When installed on spot, the only thing to do is to connect
the gas source and power. Excellent electrical and mechanical assembly
technology; Continuous technical services are provided; Responsible for on-site
commissioning and training.
Ammonia Cracker for H2 Generation,Hydrogen Generator Ammonia Decomposition,Hydrogen From Ammonia Crackers Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net
1, the gun motor does not turn
(1) Fault cause: Three-phase power supply is lacking; Remedy method: Check the power supply line (2) Fault cause: The oil gun switch board is broken (oil gun light indicator is off); Remedy: Replace the oil gun switch board (3) Fault Cause: The burnout of the relay contacts on the driver board; Remedy: Check and replace the driver board (4) Fault cause: Motor coil burned; Remedy: Rewind motor coil (5) Fault cause: No 5V control signal output from the main board; Exclude Method: Check the mainboard or replace the mainboard (6) Fault cause: The power supply board is bad (the power light is off); Remedy: Check the power supply board or change the board
2, can not stop the motor after shutting the gun
(1) Fault cause: The switch board is bad (oil gun light does not shine); Remedy: Replace the switch board (2) Fault cause: Main board 5V control signal is not jointed; Remedy: Overhaul the main board (3) Fault cause: Driver board The contact of the relay is burned; Remedy: Replace the driver board or relay
3, display LCD missing strokes
(1) Fault cause: The LCD pin is not inserted tightly; Remedy: Re-inserted (2) Cause of failure: Damage to the LCD panel; Remedy: Replace the LCD panel (3) Fault cause: Welded display board PCB blank; Method: Rewelding try (4) Cause of failure: bad display board; Remedy: Change display board
4, keyboard operation failure
(1) Failure cause: A key is not available; Remedy: Change or clean the key (2) Fault cause: A row or column cannot be removed; Remedy: Loose wire or line break (3) Cause of failure: All The key is not available; Remedy: Electronic lock is not off; Replace the motherboard (4) Fault cause: The display board is bad; Remedy: Change the display board