Jinan Sanquan Zhongshi fully implements the standard of stainless steel injection needle for YBB00092004-2015 pre-filled syringe, developed and produced pre-filled needle rigidity tester GXY-02, stainless steel injection needle for pre-filled syringe for standard requirements of medicine packaging materials Rigidity test, also known as medical needle rigid tester, medical syringe tester, etc. Pre-filled injection needle rigidity tester YBB00092004-2015 Test procedure: Take the appropriate amount of this product after separation from the glass needle tube. The rigid test instrument can exert a force of up to 60N (accuracy: ±0.1N) through the force pushing rod and act vertically downward on the needle tube. The lower end of the force pushing rod is composed of a cylindrical shape with an angle of 60° and a cylindrical surface with a radius of curvature of lmm. The width of the push rod is at least 5 mm, and the needle rigidity tester is adjusted as follows: specification Mm Normal wall Thin wall Ultra-thin wall Span, mm±0.1 Load, N±0.1 Maximum deflection mm Span, mm±0.1 Load, N±0.1 Maximum deflection mm Span, mm±0.1 Load, N±0.1 Maximum deflection mm 0.30 0.33 0.36 0.40 0.45 0.50 0.55 0.60 0.70 0.80 0.90 1.10 1.20 1.40 1.60 1.80 2.10 2.40 2.70 3.00 3.40 5 5 5 9.5 10 10 10 12.5 15 15 17.5 25 25 25 25 25 30 40 40 50 50 5.5 5.5 5.5 5.5 6 7 10 10 10 15 15 10 20 twenty two twenty two 25 40 40 50 50 60 0.40 0.32 0.25 0.60 0.56 0.38 0.50 0.40 0.45 0.41 0.48 0.45 0.45 0.45 0.25 0.35 0.40 0.38 0.31 0.41 0.32 5 5 5 7.5 10 10 10 12.5 15 15 17.5 25 25 25 25 25 30 40 40 50 50 5.5 5.5 5.5 5.5 5.5 7 10 10 10 15 15 10 20 twenty two twenty two 25 40 40 50 50 60 0.45 0.37 0.30 0.65 0.61 0.43 0.55 0.45 0.50 0.50 0.65 0.55 0.55 0.55 0.30 0.45 0.50 0.65 0.45 0.55 0.46 - - - - - - - 12.5 15 ※ ※ 25 ※ ※ 25 ※ ※ - - - - - - - - - - - 10 10 ※ ※ 10 ※ ※ twenty two ※ ※ - - - - - - - - - - - 0.50 0.55 ※ ※ 0.65 ※ ※ 0.34 ※ ※ - - - - Note: For those who call ※ , there is no valid data for these specifications, so the standard does not give the rigidity value. Medical injection needle rigidity test conditions Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. (registered brand: Sumspring Sanquan Zhongshi) is a high-tech innovative enterprise specializing in the research and development and sales of laboratory analytical instruments. The company was established in 2007 and specializes in quality inspection and drug inspection systems. The food industry, pharmaceutical industry, packaging and printing industry, adhesive industry, home appliance industry, etc. provide packaging materials scientific testing instruments and comprehensive quality control solutions. 1 inch 25mm wide different length highly visible straps with reinforced edges, Small Ratchet Straps,Tie Down Straps,Ratchet Strap Pulley,Mini Ratchet Straps,Tire Tie Down Straps WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.webestusa.com
Experimental principle: A prescribed force is applied to the center of a prescribed span of a needle tube supported at both ends, and the deflection value of the needle tube is measured.
a) making the span the value corresponding to the gauge of the needle to be tested;
b) positioning the end surface of the force pushing rod at the center of the span;
c) Keep the needle tube perpendicular to the two needle holders and the forceps, while making the needle centerline coincide with the centerline of the needle holder.
Test according to the specified span and load conditions: According to the force corresponding to the specification of the needle tube, the bending force is applied downward to the needle tube by the force pushing rod at a rate of lmm/min, and the deflection of the needle tube at the point of application is measured and recorded. , to the accuracy of 0.01mm, max deflection should meet the requirements of Table 1.
Various models of hooks - For a non-marring hold, protecting your cargo and vehicle
Durable- Ratcheting component adjusts the straps from 1ft. to 16 ft. in length to easily and safely secure cargo
LOAD LIMIT - Safe working load limit of 1,100 lbs / break strength of 3,300 lbs