On-site repair of slurry pump casing wear step 1. Disassemble the pump body and have repair conditions; 2. Flush the repaired volute with steam and a clean water source to remove residual media; 3. Roughing the repaired parts with sandblasting or electric tools to expose the original metallic color; 4. Use a clean compressed air to remove surface dust; 5. Brush the SD3000 primer material in the repaired area; 6. Proportionately blending Sole carbon nanopolymer materials; 7. Apply the Sole SD7400 material to the repaired area to a smooth surface; 8. Install the rotor impeller after the material is solidified; 9. Put into operation. Finned Heat Sink,Pin Fin Heat Sink,Zipper Fin Heat Sink,Folded Fin Heat Sink Suzhou Wint Electric Co., Ltd , https://www.winforthermal.com